File:Mandelbrot Components.svg is a vector version of this file. It should be used in place of this JPG file when not inferior. File:Mandelbrot set Components.jpg → File:Mandelbrot Components.svg For more information, see Help:SVG. In other languages Alemannisch ∙ العربية ∙ беларуская (тарашкевіца) ∙ български ∙ বাংলা ∙ català ∙ нохчийн ∙ čeština ∙ dansk ∙ Deutsch ∙ Ελληνικά ∙ English ∙ British English ∙ Esperanto ∙ español ∙ eesti ∙ euskara ∙ فارسی ∙ suomi ∙ français ∙ Frysk ∙ galego ∙ Alemannisch ∙ עברית ∙ hrvatski ∙ magyar ∙ հայերեն ∙ Bahasa Indonesia ∙ Ido ∙ italiano ∙ 日本語 ∙ ქართული ∙ 한국어 ∙ lietuvių ∙ македонски ∙ മലയാളം ∙ Bahasa Melayu ∙ norsk bokmål ∙ Plattdüütsch ∙ Nederlands ∙ norsk nynorsk ∙ norsk ∙ occitan ∙ polski ∙ prūsiskan ∙ português ∙ português do Brasil ∙ română ∙ русский ∙ sicilianu ∙ Scots ∙ slovenčina ∙ slovenščina ∙ српски / srpski ∙ svenska ∙ தமிழ் ∙ ไทย ∙ Türkçe ∙ татарча / tatarça ∙ українська ∙ vèneto ∙ Tiếng Việt ∙ 中文 ∙ 中文（中国大陆） ∙ 中文（简体） ∙ 中文（繁體） ∙ 中文（马来西亚） ∙ 中文（新加坡） ∙ 中文（臺灣） ∙ 中文（臺灣） ∙ +/−

 

 

इस JPG ग्राफ़िक को Gnuplot की मदद से बनाया गया था.

Boundaries of hyperbolic components of Mandelbrot sets are closed curves : cardioids^[1] or circles.

Douady-Hubbard-Sullivan theorem (DHS) states that unit circle can be mapped to boundary of hyperbolic component. This relation id defined by boundary equations. Here these equations, are used to draw boundaries of hyperbolic components.

Douady-Hubbard-Sullivan theorem (DHS) states that the multiplier map ${\displaystyle \rho _{n}\,}$ " of an attracting periodic orbit is a conformal isomorphism from a hyperbolic component ${\displaystyle H_{n}\,}$ of the Mandelbrot set onto the unit disk ${\displaystyle D\,}$ and it extends homeomorpically to the boundaries." ^[2]

Here it is important that it maps boundary of hyperbolic component to boundary of unit disk ( = unit circle ) :

${\displaystyle \rho _{n}:\partial H_{n}\rightarrow \partial D\,}$

and it's inverse function maps unit circle to boundary of hyperbolic components :

${\displaystyle \gamma _{n}:\partial D\rightarrow \partial H_{n}\,}$

The algorithm consist of 2 big steps :

• rasterisation of closed curve parametrised by angle ${\displaystyle t\,}$
• complex mapping.

In datails there are more steps.

For given period ${\displaystyle n\,}$ do steps :

• Decide how many points of closed curve you want to draw ( iMax ).
• Compute ${\displaystyle dt={\frac {1}{iMax}}\,}$
• start with ${\displaystyle t=0\,}$
• while ${\displaystyle t<1\,}$ repeat :
  • compute point of the unit circle in the standard plane ${\displaystyle w=l(t)=e^{i*t}\,}$ where ${\displaystyle t\,}$ is an internal angle,
  • map points onto the parameter plane (complex mapping ) using one of 2 methods :
    • using explicit function ${\displaystyle c=\gamma _{n}(w)\,}$ ( it is possible only for periods 1-3)
    • solving implicit equation ${\displaystyle b_{n}(c,w)=0\,}$ with respect to ${\displaystyle c\,}$ ( it is posible for periods 1-8 using numerical methods)
  • compute new angle ${\displaystyle t=t+dt\,}$

• draw set of points, which looks like curve ^[3]

Complex quadratic map :

f(z,c):=z*z+c;

Iterated function (map)  :

F(n, z, c) :=
   if n=1 then f(z,c)
   else f(F(n-1, z, c),c);

Multiplier of periodic orbit  :

${\displaystyle \lambda ={\frac {dF(n,z,c)}{dz}}\,}$

_lambda(n):=diff(F(n,z,c),z,1);

Unit circle ${\displaystyle \partial D\,}$ = boundary of unit disk

${\displaystyle \partial D=\left\{w:abs(w)=1\right\}}$

where coordinates of ${\displaystyle w\,}$ point of unit circle in exponential form are :

${\displaystyle w=e^{i*t}\,}$

Boundary equation

${\displaystyle b_{n}(w,c)=0\,}$

• defines relations between hyperbolic components and unit circle for given period ${\displaystyle n\,}$,
• allows computation of exact coordinates of hyperbolic componenets.

${\displaystyle b_{n}(w,c)\,}$ is boundary polynomial ( implicit function of 2 variables ).

Equations are in papers of Brown^[4],John Stephenson^[5], Wolf Jung^[6]. Methods of finding boundary equations are also described in WikiBooks.

For boundary points :

${\displaystyle P*2^{period}=w=e^{it}=\cos t+i*\sin t\,}$

so boundary equations can be in 4 equivalent forms :

period ${\displaystyle n\,}$	${\displaystyle b_{n}(P,c)=0\,}$	${\displaystyle b_{n}(w,c)=0\,}$	exponential ${\displaystyle b_{n}(t,c)=0\,}$	trigonometric ${\displaystyle b_{n}(t,c)=0\,}$
1	${\displaystyle c+P^{2}-P=0\,}$	${\displaystyle c+({\frac {w}{2}})^{2}-{\frac {w}{2}}=0\,}$	${\displaystyle c+({\frac {e^{it}}{2}})^{2}-{\frac {e^{it}}{2}}=0\,}$	${\displaystyle c+({\frac {\cos t+i*\sin t}{2}})^{2}-{\frac {\cos t+i*\sin t}{2}}=0\,}$
2	${\displaystyle -c+P-1=0\,}$	${\displaystyle -c+{\frac {w}{4}}-1=0\,}$	${\displaystyle -c+{\frac {e^{it}}{4}}-1=0\,}$	${\displaystyle -c+{\frac {\cos t+i*\sin t}{4}}-1=0\,}$

For higher periods only P-form is used, because it is the shortest and usefull for computations.

for period 3 :

${\displaystyle c^{3}+2*c^{2}-(P-1)*c+(P-1)^{2}=0\,}$

for period 4 :

${\displaystyle c^{6}+3*c^{5}+(P+3)*c^{4}+(P+3)*c^{3}-(P+2)*(P-1)*c^{2}-(P-1)^{3}=0\,}$

for period 5 :

${\displaystyle c^{15}+8c^{14}+28c^{13}+(P+60)c^{12}+(7P+94)c^{11}+(3P^{2}+20P+116)c^{10}+(11P^{2}+33P+114)c^{9}+(6P^{2}+40P+94)c^{8}+(2P^{3}-20P^{2}+37P+69)c^{7}+(3P-11)(3P^{2}-3P-4)c^{6}+(P-1)(3P^{3}+20P^{2}-33P-26)c^{5}+(3P^{2}+27P+14)(P-1)^{2}c^{4}-(6P+5)(P-1)^{3}c^{3}+(P+2)(P-1)^{4}c^{2}-c(P-1)^{5}+(P-1)^{6}=0\,}$

Boundary equations for periods:

• 1-3 it can be solved with symbolical methods and give explicit solution : ${\displaystyle c=\gamma _{n}(w)\,}$
  • 1-2 it is easy to solve ^[7]
  • 3 it can be solve using "elementary algebra" ( Stephenson )
• >3 it can't be solved explicitly and must be solved numerically with respect to ${\displaystyle c\,}$.

There is only one period 1 component. ^[8] Because boundary equation is simple :

${\displaystyle c+P^{2}-P=0\,}$

so it is easy to get inverse multiplier map :

${\displaystyle c=\gamma _{1}(P)=P-P^{2}\,}$

For each internal angle ${\displaystyle t\,}$ one computes :

• point on unit circle ${\displaystyle w=l(t)\,}$,
• ${\displaystyle P={\frac {w}{2}}\,}$
• point ${\displaystyle c=\gamma _{1}(P)\,}$

Result is a list of boundary points ${\displaystyle c\,}$ .

Because boundary equation is simple :

${\displaystyle -c+P-1=0\,}$

so it is easy to get inverse multiplier map  :

${\displaystyle c=\gamma _{2}(P)=P-1\,}$

For each internal angle ${\displaystyle t\,}$ one computes :

• point on unit circle ${\displaystyle w=l(t)\,}$,
• ${\displaystyle P={\frac {w}{2^{2}}}\,}$
• point ${\displaystyle c=\gamma _{2}(P)\,}$

Result is a list of boundary points ${\displaystyle c\,}$ .

There are 3 period 3 components^[9] Here solution of boundary equation gives 3 inverse multiplier maps ${\displaystyle c=\gamma _{3}(P)\,}$.

It is possible in 3 ways :

• Munafo method^[10] (every functions maps one half of one component and one half of other component)
• Giarrusso-Fisher method ^[11] ( one function for one component )
• Walter Hannah method

I use functions by Robert Munafo.

(%i3) b3:c^3+2*c^2+(1-P)*c+(P-1)^2=0$
(%i4) solve(b3,c);
(%o4) [
c=(-(sqrt(3)*%i)/2-1/2)*(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3)+
(((sqrt(3)*%i)/2-1/2)*(3*P+1))/(9*(((P-  1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3))-2/3,
c=((sqrt(3)*%i)/2-1/2)*
(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3)+
((-(sqrt(3)*%i)/2-1/2)*(3*P+1))/(9*(((P-1)*sqrt(27*P^2-22*P+23)) /(6*sqrt(3))-
(27*P^2-36*P+25)/54)^(1/3))-2/3,
c=(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3)+
(3*P+1)/(9*(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3))

For each internal angle ${\displaystyle t\,}$ one computes :

• point on unit circle ${\displaystyle w=l(t)\,}$,
• ${\displaystyle P={\frac {w}{2^{3}}}\,}$
• points :
  • ${\displaystyle c=\gamma _{3a}(P)\,}$
  • ${\displaystyle c=\gamma _{3b}(P)\,}$
  • ${\displaystyle c=\gamma _{3c}(P)\,}$

Result is a list of boundary points ${\displaystyle c\,}$ .

Boundary equation ${\displaystyle b_{4}(P,c)=0\,}$ one can find in Mu-Ency. It can't be solved symbolicaly so it must be evaluated numerically ^[12].

It is 1 equation with 2 variables. To solve it one has to compute ${\displaystyle P\,}$ and put in ${\displaystyle b_{4}(P,c)=0\,}$. Now it is equation with 1 variable ${\displaystyle c\,}$ and it can be solved numerically.

For each internal angle ${\displaystyle t\,}$ one computes :

• point on unit circle ${\displaystyle w=l(t)\,}$,
• ${\displaystyle P={\frac {w}{2^{4}}}\,}$
• Boundary polynomial ${\displaystyle b_{4}(P,c)\,}$
• solve boundary equation ${\displaystyle b_{4}(P,c)=0\,}$ with respect to ${\displaystyle c\,}$. Result is 6 roots ( each for one of 6 period 4 components).

Result is a list of boundary points ${\displaystyle c\,}$ .

b4(w):=c^6 + 3*c^5 + (w/16+3)* c^4 + (w/16+3)* c^3  - (w/16+2)* (w/16-1)* c^2 - (w/16-1)^3;
l(t):=%e^(%i*t*2*%pi);
iMax:200; /* number of point */
dt:1/iMax;
/* point to point method of drawing */
t:0; /* angle in turns */
w:rectform(ev(l(t), numer)); /* "exponential form prevents allroots from working", code by Robert P. Munafo */
/* compute equation for given w */
per4:expand(b4(w));
/* compute 6 complex roots and save them to the list cc4 */
cc4:allroots(per4);
/*  create new lists and save coordinates  to draw it later */ 
xx4:makelist (realpart(rhs(cc4[1])), i, 1, 1); 
yy4:makelist (imagpart(rhs(cc4[1])), i, 1, 1);
for j:2 thru 6 step 1 do
 block
 (
  xx4:cons(realpart(rhs(cc4[j])),xx4),
  yy4:cons(imagpart(rhs(cc4[j])),yy4)
 );
for i:2 thru iMax step 1 do
block
( t:t+dt,
  w:rectform(ev(l(t), numer)), /* code by Robert P. Munafo  */
  per4:expand(m4(w)),
  cc4:allroots(per4),
  for j:1 thru 6 step 1 do
   block
   (
    xx4:cons(realpart(rhs(cc4[j])),xx4),
    yy4:cons(imagpart(rhs(cc4[j])),yy4)
   )
  );

one computes in the same way as for period 4, only implicit function is diffrent and there are 15 components.

one computes in the same way as for period 4, only implicit function is diffrent (see Stephenson paper II ) and there are 27 components.

one computes in the same way as for period 4, only implicit function is diffrent (degree in c is 63; see Stephenson paper III ) and there are 63 components.

Implicit equation ${\displaystyle b_{8}(P,c)=0\,}$ can be computed but "is too large to exhibit" (see Stephenson paper III ). There are 120 components.

"Although extension of the arithmethic method to higher orders is possible in principle, the computations become to big in space and time " (Stephenson paper III )

period ${\displaystyle n\,}$	${\displaystyle b_{n}(P,c)=0\,}$	${\displaystyle P=\rho _{n}(c)\,}$	${\displaystyle c=\gamma _{n}(P)\,}$	${\displaystyle \lambda _{c,n}(z)={\frac {dF(n,z,c)}{dz}}\,}$
1	${\displaystyle c+P^{2}-P=0\,}$	${\displaystyle P=1-{\sqrt {1-4c}}\,}$	${\displaystyle c=P-P^{2}\,}$	${\displaystyle \lambda _{c,1}(z)=2z\,}$
2	${\displaystyle -c+P-1=0\,}$	${\displaystyle P=c+1\,}$	${\displaystyle c=P-1\,}$	${\displaystyle \lambda _{c,2}(z)=4z^{3}+4cz\,}$
3	${\displaystyle c^{3}+2c^{2}-(P-1)c+(P-1)^{2}=0\,}$			${\displaystyle \lambda _{c,3}(z)=8z^{7}+24cz^{5}+(24c^{2}+8c)z^{3}+(8c^{3}+8c^{2})z\,}$

Symbolic solution of boundary equation is possible only for periods 1-3 ( with respect to ${\displaystyle P\,}$ or ${\displaystyle c\,}$). Every function can be in 4 equivalent forms : P, w, exponential t, trigonometric t (see boundary equations for details).

Solving with respect to ${\displaystyle P\,}$ gives 2 results. hoose attracting one.

Solving is simple because these are degree 1 equations ( with respect to both ${\displaystyle P\,}$ and ${\displaystyle c\,}$).

Solving with respect to ${\displaystyle c\,}$ is possible in 3 ways.

Solving with respect to ${\displaystyle P\,}$ gives 2 results. One have to choose attracting.

/* 
batch file for Maxima
http://maxima.sourceforge.net/
wxMaxima 0.7.6 http://wxmaxima.sourceforge.net archive copy at the Wayback Machine
Maxima 5.16.1 http://maxima.sourceforge.net
Using Lisp GNU Common Lisp (GCL) GCL 2.6.8 (aka GCL)
Distributed under the GNU Public License. 
based on :
http://www.mrob.com/pub/muency/brownmethod.html
*/
start:elapsed_run_time ();
iMax:200; /* number of points to draw */
dt:1/iMax;
/* 
unit circle D={w:abs(w)=1 } where w=l(t) 
t is angle in turns ; 1 turn = 360 degree = 2*Pi radians 
*/
l(t):=%e^(%i*t*2*%pi);
/* 
conformal maps from unit circle 
to hyperbolic component of Mandelbrot set of period 1-4 
These functions ( maps ) are computed in other batch file 
*/
/* ---------------  inverse function of multiplier map : explicit function : c=gamma_p(P)  where P = w/(2^period) ---------------- */
gamma1(P):=P-P^2;
gamma2(P):=P - 1;
/* code of functions by Robert P. Munafo */
gamma3a(P):=(-(sqrt(3)*%i)/2-1/2)*(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3)+
(((sqrt(3)*%i)/2-1/2)*(3*P+1))/(9*(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3))-2/3;
gamma3b(P):=((sqrt(3)*%i)/2-1/2)*(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3)+
((-(sqrt(3)*%i)/2-1/2)*(3*P+1))/(9*(((P-  1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3))-2/3;
gamma3c(P):=(((P-1)*sqrt(27*P^2-22*P+23))/(6*sqrt(3))-(27*P^2-36*P+25)/54)^(1/3)+(3*P+1)/(9*(((P-1)*sqrt(27*P^2-22*P+23))/ 
(6*sqrt(3))-   (27*P^2-36*P+25) /54)^(1/3))-2/3;
/* ---------- boundary equation (implicit function)  b_p(P,c)=0 ------------------------------------------------------------------ */
b4(P):=c^6 + 3*c^5 + (P+3)* c^4 + (P+3)* c^3  - (P+2)*(P-1)*c^2 - (P-1)^3;
/* ------ period 5 ------------- */
b5(P):=c^15 + 
8*c^14 + 
28*c^13 + 
(P + 60)*c^12 + 
(7*P + 94)*c^11 + 
(3*(P)^2 + 20*P + 116)*c^10 + 
(11*P^2 + 33*P + 114)*c^9 +
(6*P^2 + 40*P + 94)*c^8 + 
(2*P^3 - 20*P^2 + 37*P + 69)*c^7 + 
(3*P - 11)*(3*P^2 - 3*P - 4)*c^6 + 
(P - 1)*(3*P^3 + 20*P^2 - 33*P - 26)*c^5 + 
( 3*P^2 + 27*P + 14)*((P - 1)^2)*c^4 - 
(6*P + 5)*((P - 1)^3 )*c^3 + 
(P + 2)*((P - 1)^4)*c^2 - 
c*(P - 1)^5  + 
(P - 1)^6 ;
/*-----period 6 ----------------------- */
b6(P):=
c^27+
13*c^26+
78*c^25+
(293 - P)*c^24+
(792 - 10*P)*c^23+
(1672 - 41*P)*c^22+
(2892 - 84*P - 4*P^2)*c^21+
(4219 - 60*P - 30*P^2)*c^20+
(5313 + 155*P - 80*P^2)*c^19+
(5892 + 642*P - 57*P^2 + 4*P^3)*c^18+
(5843 + 1347*P + 195*P^2 + 22*P^3)*c^17+
(5258 + 2036*P + 734*P^2 + 22*P^3)*c^16+
(4346 + 2455*P + 1441*P^2 - 112*P^3 + 6*P^4)*c^15 + 
(3310 + 2522*P + 1941*P^2 - 441*P^3 + 20*P^4)*c^14 + 
(2331 + 2272*P + 1881*P^2 - 853*P^3 - 15*P^4)*c^13 + 
(1525 + 1842*P + 1344*P^2 - 1157*P^3 - 124*P^4 - 6*P^5)*c^12 + 
(927 + 1385*P + 570*P^2 - 1143*P^3 - 189*P^4 - 14*P^5)*c^11 + 
(536 + 923*P - 126*P^2 - 774*P^3 - 186*P^4 + 11*P^5)*c^10 + 
(298 + 834*P + 367*P^2 + 45*P^3 - 4*P^4 + 4*P^5)*(1-P)*c^9 + 
(155 + 445*P - 148*P^2 - 109*P^3 + 103*P^4 + 2*P^5)*(1-P)*c^8 + 
2*(38 + 142*P - 37*P^2 - 62*P^3 + 17*P^4)*(1-P)^2*c^7 + 
(35 + 166*P + 18*P^2 - 75*P^3 - 4*P^4)*((1-P)^3)*c^6 + 
(17 + 94*P + 62*P^2 + 2*P^3)*((1-P)^4)*c^5 + 
(7 + 34*P + 8*P^2)*((1-P)^5)*c^4 + 
(3 + 10*P + P^2)*((1-P)^6)*c^3 + 
(1 + P)*((1-P)^7)*c^2 +
-c*((1-P)^8) + (1-P)^9;
/*-----------------------------------*/
/* point to point method of drawing */
t:0; /* angle in turns */ 
/* compute first point of curve, create list and save point to this list */
/* point of unit circle   w:l(t); */
w:rectform(ev(l(t), numer)); /* "exponential form prevents allroots from working", code by Robert P. Munafo */ 
/* ---- period 1 -------------------*/
P:w/2;
c1:gamma1(P);
xx1:makelist (realpart(c1), i, 1, 1); /* save coordinates  to draw it later */ 
yy1:makelist (imagpart(c1), i, 1, 1);
/* -----period 2 --------------*/
P:P/2;
c2:gamma2(P); 
xx2:makelist (realpart(c2), i, 1, 1); 
yy2:makelist (imagpart(c2), i, 1, 1); 
/* period 3 components */
P:P/2;
c3:gamma3a(P); 
xx3a:makelist (realpart(c3), i, 1, 1); 
yy3a:makelist (imagpart(c3), i, 1, 1); 
c3:gamma3b(w);
xx3b:makelist (realpart(c3), i, 1, 1); 
yy3b:makelist (imagpart(c3), i, 1, 1); 
c3:gamma3c(w);
xx3c:makelist (realpart(c3), i, 1, 1); 
yy3c:makelist (imagpart(c3), i, 1, 1);
/* period 4 */ 
P:P/2;
per4:expand(b4(P)); /* compute equation for given w ( t) */
cc4:allroots(per4); /* compute 6 complex roots and save them to the list cc4 */
/*  create new lists and save coordinates  to draw it later */ 
xx4:makelist (realpart(rhs(cc4[1])), i, 1, 1); 
yy4:makelist (imagpart(rhs(cc4[1])), i, 1, 1);
for j:2 thru 6 step 1 do
block
(
xx4:cons(realpart(rhs(cc4[j])),xx4),
yy4:cons(imagpart(rhs(cc4[j])),yy4)
);
/* period 5 */
P:P/2;
per5:expand(b5(P)); /* compute equation for given w ( t) */
cc5:allroots(per5); /* compute 15 complex roots and save them to the list cc5 */
/*  create new lists and save coordinates  to draw it later */ 
xx5:makelist (realpart(rhs(cc5[1])), i, 1, 1); 
yy5:makelist (imagpart(rhs(cc5[1])), i, 1, 1);
for j:2 thru 15 step 1 do
block
(
xx5:cons(realpart(rhs(cc5[j])),xx5),
yy5:cons(imagpart(rhs(cc5[j])),yy5)
);
/* period 6 */
P:P/2;
per6:expand(b6(P)); /* compute equation for given w ( t) */
cc6:allroots(per6); /* compute 15 complex roots and save them to the list cc5 */
/*  create new lists and save coordinates  to draw it later */ 
xx6:makelist (realpart(rhs(cc6[1])), i, 1, 1); 
yy6:makelist (imagpart(rhs(cc6[1])), i, 1, 1);
for j:2 thru 27 step 1 do
block
(
 xx6:cons(realpart(rhs(cc6[j])),xx6),
 yy6:cons(imagpart(rhs(cc6[j])),yy6)
) ;
/* ------------*/
for i:2 thru iMax step 1 do
block
( t:t+dt,
 w:rectform(ev(l(t), numer)), /* "exponential form prevents allroots from working", code by Robert P. Munafo */ 
 P:w/2,
 c1:gamma1(P),
 /* save values to draw it later */
 xx1:cons(realpart(c1),xx1),
 yy1:cons(imagpart(c1),yy1),
 P:P/2,
 c2:gamma2(P),
 xx2:cons(realpart(c2),xx2),
 yy2:cons(imagpart(c2),yy2),
 P:P/2,
 c3:gamma3a(P),
 xx3a:cons(realpart(c3),xx3a),
 yy3a:cons(imagpart(c3),yy3a),
 c3:gamma3b(P),
 xx3b:cons(realpart(c3),xx3b),
 yy3b:cons(imagpart(c3),yy3b),
 c3:gamma3c(P),
 xx3c:cons(realpart(c3),xx3c),
 yy3c:cons(imagpart(c3),yy3c),
 /* period 4 */
 P:P/2,
 per4:expand(b4(P)),
 cc4:allroots(per4),
 for j:1 thru 6 step 1 do
  block
   (
   xx4:cons(realpart(rhs(cc4[j])),xx4),
   yy4:cons(imagpart(rhs(cc4[j])),yy4)
   ),
 /* period 5 */
 P:P/2,
 per5:expand(b5(P)), /* compute equation for given w ( t) */
 cc5:allroots(per5), /* compute 15 complex roots and save them to the list cc5 */
 for j:1 thru 15 step 1 do
 block
  (
  xx5:cons(realpart(rhs(cc5[j])),xx5),
  yy5:cons(imagpart(rhs(cc5[j])),yy5)
  ),
 /* period 6 */
 P:P/2,
 per6:expand(b6(P)), /* compute equation for given w ( t) */
 cc6:allroots(per6), /* compute 27 complex roots and save them to the list cc6 */
 for j:1 thru 27 step 1 do
  block
  (
  xx6:cons(realpart(rhs(cc6[j])),xx6),
  yy6:cons(imagpart(rhs(cc6[j])),yy6)
  )    
 );
stop:elapsed_run_time ();
time:fix(stop-start); 
load(draw);
draw2d(
  file_name = "", /* file in directory  C:\Program Files\Maxima-5.16.1\wxMaxima */
  terminal  = 'screen, /* jpg when draw to file with jpg extension */
  pic_width  = 1000,
  pic_height = 1000,
  yrange = [-1.5,1.5],
  xrange = [-2,1],
  title= concat("Boundaries of 53 hyperbolic components of Mandelbrot set made in ",string(time),"sec"),
  xlabel     = "c.re ",
  ylabel     = "c.im",
  point_type    = dot,
  point_size    = 5,
  points_joined =true,
  user_preamble="set size square;set key out vert;set key bot center",
  key = "one period 1 component = {c:c=(2*w-w*w)/4} ",
  color         = red,
  points(xx1,yy1),
  key = "one period 2 component = {c:c=(w/4 -1)} ",
  color         = green,
  points(xx2,yy2),
  key = "",
  color         = blue,
  points_joined =false, /* there are 3 curves so we can't join points */
  points(xx3a,yy3a),
  points(xx3b,yy3b),
  key = "three period 3 components (blue)",
  points(xx3c,yy3c),
  key = "six period 4 components (magenta)",
  color         = magenta,
  points(xx4,yy4),
  key = "fifteen period 5 components (black)",
  color         = black,
  points(xx5,yy5),
  key = "27 period 6 components (black)",
  color         = black,
  points(xx6,yy6)
);

• How to compute ( draw) components for higher periods ?
• What is mathemathical description of these curves ? ( only main bulb is cardioid, other cardioid like bulbs are higher degrees curves )
• How to save it as a svg file ?
• What is the difrence between Munafo and Hannah inverse multiplier maps for period 3 hyperbolic components ? ( Or are they equivalent ?)
• Can it be done better in Maxima ?
• Can it be done in other programming languages ?
• What are equations for dendrits and antenna of Mandelbrot set ? ( dendrits consist of small components )

• Mathematica code
  • by Walter Hannah ^[13]
  • by Mark McClure archive copy at the Wayback Machine ^[14] ( see also Maxima version )
• Maple code
  • V Dolotin , A Morozow : On the shapes of elementary domains or why Mandelbrot set is made from almost ideal circles
  • V Dolotin , A Morozow : Algebraic Geometry of Discrete Dynamics. The case of one variable
  • Wolf Jung : Some Explicit Formulas for the Iteration of Rational Functions. Unpublished manuscript of August 1997.
  • Young Hee Geum, Kevin G. Hare : Groebner Basis, Resultants and the generalized Mandelbrot Set - methods for period 2 and higher, using factorization for finding irreducible polynomials

• Other method of drawing based on Newton method

1. ↑ The Mandelbrot set contains an infinite number of slightly distorted copies of itself and the central bulb of any of these smaller copies is an approximate cardioid. These curves are notr cardioids but higher degree curves
2. ↑ Multipliers of periodic orbits of quadratic polynomials and the parameter plane by Genadi Levin
3. ↑ Algebraic solution of Mandelbrot orbital boundaries by Donald D. Cross
4. ↑ A. Brown, Equations for Periodic Solutions of a Logistic Difference Equation, J. Austral. Math. Soc (Series B) 23, 78–94 (1981).
5. ↑ John Stephenson : "Formulae for cycles in the Mandelbrot set", Physica A 177, 416-420 (1991); "Formulae for cycles in the Mandelbrot set II", Physica A 190, 104-116 (1992); "Formulae for cycles in the Mandelbrot set III", Physica A 190, 117-129 (1992)
6. ↑ Wolf Jung : "Some Explicit Formulas for the Iteration of Rational Functions" , unpublished manuscript of August 1997 containing Maple code
7. ↑ Thayer Watkins : The Structure of the Mandelbrot Set
8. ↑ Enumeration of Features by Robert P. Munafo
9. ↑ M. Lutzky: Counting hyperbolic components of the Mandelbrot set. Physics Letters A Volume 177, Issues 4-5, 21 June 1993, Pages 338-340
10. ↑ Brown Method by Robert P. Munafo
11. ↑ A Parameterization of the Period 3 Hyperbolic Components of the Mandelbrot Set Dante Giarrusso; Yuval Fisher Proceedings of the American Mathematical Society, Vol. 123, No. 12. (Dec., 1995), pp. 3731-3737
12. ↑ Exact Coordinates by Robert P. Munafo
13. ↑ Internal Rays of the Mandelbrot Set by Walter Hannah
14. ↑ Mark McClure "Bifurcation sets and critical curves" - Mathematica in Education and Research, Volume 11, issue 1 (2006). archive copy at the Wayback Machine

• Newsgroups: gmane.comp.mathematics.maxima.general Subject: polynomial equations Date: 2007-09-26

This program is not only my work but was done with help of many great people (see references). Warm thanks (:-))

मैं, इस कार्य का/की कॉपीराइट धारक, इसे निम्न लाइसेंस के अंतर्गत प्रकाशित करता/करती हूँ:

इस फ़ाइल को क्रिएटिव कॉमन्स श्रेय-समानसांझा 3.0 अनरिपोर्टेड लाइसेंस के अंतर्गत लाइसेंस किया गया है।

आप खुलकर:

• बाँट सकते हैं – रचना की प्रतिलिपि बना सकते हैं, बाँँट सकते हैं और संचारित कर सकते हैं
• रीमिक्स कर सकते हैं – कार्य को अनुकूलित कर सकते हैं

निम्नलिखित शर्तों के अंतर्गत:

• श्रेय – यह अनिवार्य है कि आप यथोचित श्रेय प्रदान करें, लाइसेंस की कड़ी प्रदान करें, और अगर कोई बदलाव हुए हों तो उन्हें इंगित करें। आप ऐसा किसी भी उचित तरीके से कर सकते हैं, लेकिन किसी भी तरह उससे यह नहीं संकेत नहीं किया जाना चाहिए कि लाइसेंसधारी द्वारा आपको अथवा आपके इस प्रयोग का समर्थन किया जा रहा हो।
• समानसांझा – अगर आप इस रचना में कोई बदलाव करते हैं या इसपर आधारित कुछ रचित करते हैं तो आप अपने योगदान को सिर्फ इसी या इसके सामान किसी लाइसेंस के अंतर्गत बाँट सकते हैं।

https://creativecommons.org/licenses/by-sa/3.0CC BY-SA 3.0 Creative Commons Attribution-Share Alike 3.0 truetrue